A house is too damp when it produces or takes in more water than it releases, so the first step is to find the source before ventilating or dehumidifying.

Three categories of causes, the signs that give them away, and the steps to take.
Moisture in a home comes from three sources: the occupants’ daily activities, the building envelope, and condensation on cold surfaces. Before ventilating in the winter or installing a dehumidifier in the summer, you must identify the cause of the problem and fix it, as specified by the Government of Quebec. Significant problems are often accompanied by unpleasant odors, which provide an initial clue to why moisture is building up in the home.
Energy-saving measures, such as improved airtightness, can also increase indoor relative humidity when ventilation is insufficient, according to Health Canada.
Showers, baths, cooking, and laundry release water vapor that remains in the air when exhaust fans are not working properly or are not being used. The federal document adds overcrowding and indoor cannabis cultivation to this list, as these activities increase the amount of water vapor produced by occupants and plants.
Several habits also contribute to the problem, including a clothes dryer whose vent hose is not connected to an outdoor exhaust, a humidifier that is left on for too long, a dehumidifier tray that is not emptied, firewood stored indoors, and long showers taken without a fan.
Poor ventilation is the main cause of poor indoor air quality, and the areas most affected are the kitchen, bathroom, and basement, according to Health Canada. It is therefore a good idea to turn on the exhaust fan while cooking or showering, and then let it run for a few minutes afterward.
Building-related causes include water infiltration through cracks in the foundation, floor, walls, or roof, as well as plumbing leaks. Damp soil around the house is more prone to freezing and can cause cracks in the foundation and walls, which exacerbates water infiltration.
Several factors increase the risk:
A poor-quality or improperly installed vapor barrier also allows moisture to migrate through the walls, particularly near electrical boxes and window frames. Concrete that is not protected by a water-repellent membrane beneath wood flooring or carpet can produce odors of rotting wood or damp carpet. Major repairs, such as foundation drainage, crack repair, and exterior insulation, should be handled by a building specialist.

Regular condensation on windows in the winter is often a sign of excessive humidity or insufficient ventilation.
Condensation in the basement and on windows often indicates a ventilation problem, especially in a highly airtight home. In the summer, warm, humid air condenses on the cooler surfaces of the basement, and cold water pipes that are leaking can also come into contact with the bottom of the foundation walls.
According to the Government of Quebec, inadequate ventilation leads to condensation on windows, premature deterioration of the home, and mold growth. A mechanical ventilation system (VRC) typically extracts air from bathrooms and is required in all new construction in Quebec. However, excessive ventilation in the winter brings in cold, dry air, which causes discomfort, higher heating costs, dry eyes, and nosebleeds.
A shut-off or clogged air exchanger reduces steam exhaust, which is why it’s important to clean air exchangers when the unit isn’t working properly.
The location, season, and timing of moisture appearance can help distinguish a ventilation problem from a building envelope problem. Moisture that appears in the bathroom or kitchen after showering or cooking, or condensation on windows in the winter, points to a ventilation issue.
Localized moisture at the base of basement walls—which increases after snowmelt or heavy rain—is more likely related to the building envelope or drainage. Flooding caused by snowmelt or heavy rain is, in fact, among the causes listed in the federal document. Condensation on cold basement walls in the summer is caused by warm, humid air and is therefore related to ventilation and humidity control.
According to the Government of Quebec, regular condensation on windows or walls may indicate excessive humidity. Other signs point to excess moisture:
Mold can grow within two days in an area that is too damp, and mold is a type of fungus. To prevent and treat mold, you must first address the source of the moisture.

People who live in environments with moisture and mold are more likely to experience eye, nose, and throat irritation, coughing, wheezing, or worsening asthma symptoms. Children, older adults, and people with asthma or allergies are at greater risk and should consult a healthcare professional.
A hygrometer is used to check the humidity level, and a dehumidifier helps keep the basement dry in the summer.
According to Health Canada, the target relative humidity level is between 30 and 50 percent, and according to the Government of Quebec, it is usually between 30 and 55 percent to prevent condensation. A hygrometer, available at a reasonable price at hardware stores, can be used to measure indoor humidity levels. For more information, see our article on the ideal humidity level in the home.
The federal document recommends running a dehumidifier in the basement if there is condensation on window sills or if the relative humidity exceeds 50%. When the outdoor relative humidity exceeds 70% in the summer, keep everything closed and use a dehumidifier, as outdoor air would increase the humidity in the basement. In the winter, you can ventilate by opening two windows for two to three minutes, depending on the outdoor temperature.
Heating seems to solve the problem because warmer air can hold even more moisture, which makes the visible condensation disappear. As soon as the temperature drops again, the moisture condenses on cold surfaces and the cycle begins anew, adding water to porous materials; therefore, to achieve lasting dryness, the source of the problem must be addressed.
Start by measuring the humidity with a hygrometer, then address the source: connect the dryer vent to the outside, use fans, limit the use of the humidifier, and dry up any water damage within 24 to 48 hours. If the cause is cracks, the foundation drain, or the roof, call in a building specialist.
When moisture seems to be coming from the ventilation system, we can help. Common causes include a malfunctioning or clogged air exchanger, an inefficient bathroom fan, or a disconnected or clogged dryer vent. If the duct is clogged, cleaning the dryer vent restores the flow of humid air to the outside. We inspect the ducts and the air exchanger with a camera and provide a photo report. An indoor air quality analysis can complement this process. To request a quick quote or schedule a duct inspection, call 450-577-5578.
Fog forms because moist indoor air condenses on the cold windowpane. It often indicates insufficient ventilation or excessively high humidity, which you can check with a hygrometer.
A dehumidifier helps, especially in the basement during the summer, but it doesn’t address the root cause. So you first need to find where the water is coming from, and then fix the problem.
The answer depends on the outside air: in the winter, two to three minutes with two windows open is enough, but in the summer, on hot, humid days, the incoming air increases the humidity in the basement.
It indicates excessive moisture and may be accompanied by irritation and a cough. Discuss your symptoms with a healthcare professional and address the source of the moisture.
An inspection is useful when the unit is shut down, noisy, or clogged, or when condensation persists despite the use of fans. A camera can then be used to see the actual condition of the ducts.