Mold in a home can be identified primarily by three signs: visible stains, a musty or damp-earth odor, and signs of moisture such as condensation or water stains. An air test is rarely necessary, as a careful inspection usually reveals the cause of the problem.
To determine if there is mold in your home, look for three types of signs: visible stains, odors, and signs of moisture. According to the Government of Quebec, stains of various colors are often found on walls, ceilings, carpets, around windows, and inside closets. A distinctive musty or earthy odor is another sign, and dark rings or warping may indicate hidden moisture seepage behind building materials.
These signs often occur together, so a musty odor accompanied by regular condensation on the windows warrants a more thorough inspection than a single isolated sign.

A dark ring and stains on the ceiling often indicate water seepage and mold behind the building materials.
On a surface, mold appears as black, green, or gray spots, or as white, fuzzy growths, according to the Quebec government’s inspection guide. Mold is a microscopic fungus that reproduces through spores invisible to the naked eye, and the colonies it forms have a powdery or fuzzy texture.
Efflorescence—a mineral deposit consisting of white, powdery salt crystals—can be mistaken for white mold. However, it also indicates the presence of moisture, so it’s worth noting.
To determine the nature of a suspicious stain, the same fact sheet describes a test using undiluted bleach: moisten the stain, then wait an hour or two. Partial or total discoloration is a strong indication of mold. This result is only a clue and does not replace an investigation into the cause of the moisture.
A musty or earthy odor often indicates the presence of mold, even when nothing is visible. In addition, regular condensation on windows or walls may signal that the humidity level is too high.
The Quebec government recommends keeping relative humidity between 30% and 55%, while Health Canada suggests keeping it between 30% and 50%. A hygrometer, available at a low cost at hardware stores, can be used to measure this level. In the summer, air conditioning also helps keep the air drier. Also, as recommended by the Quebec government, make sure the dryer vent is properly connected to an outdoor outlet. To learn more about this topic, check out our articles on the ideal humidity level in the home and the causes of excessive humidity in the home.
Water damage that isn’t dried out properly poses the same risk: after 24 to 48 hours, mold can begin to grow.

The areas to check first, from the most visible to the most hidden.
Hidden mold is most often found in damp areas, where water seeps in or accumulates, as well as near leaks. Health Canada notes that mold isn’t always visible and can grow behind walls or above ceiling tiles. You should therefore inspect every room, including attics, basements, crawl spaces, and storage areas.
These damp areas, such as the bathroom or the basement, are therefore the first places to check, since mold finds the water it needs there. According to the EPA, mold can also be found behind drywall and wallpaper, under carpets, and inside air ducts. An inspection conducted while it’s raining helps identify problems that aren’t apparent in dry weather, and Quebec recommends inspecting every room at least once a year.

A quick glance into a vent opening is no substitute for a thorough inspection of the ducts.
A musty odor that appears when you turn on the heat may be coming from the unit itself. Health Canada recommends first checking the filters and humidifiers. If the problem persists after replacing or cleaning them, have the system inspected by qualified professionals.
A robotic, visual inspection of the ducts allows you to see inside the system and document its condition in a photographic report. This is particularly useful when the air handler has been shut down for a long time or when purchasing a home.
According to Health Canada, people living in a damp or moldy environment are more likely to experience eye, nose, and throat irritation; coughing; mucus buildup; wheezing; shortness of breath; or worsening asthma symptoms.
Respiratory symptoms can have many possible causes, so it is not possible to conclude that mold is present. However, according to Health Canada, exposure to mold can cause more severe health problems in certain family members: infants, children, the elderly, pregnant women, and people with respiratory conditions are at increased risk. If you have any concerns about your symptoms, talk to your doctor. Our article on the effects of mold on indoor air quality provides more details on this topic.
In most cases, a thorough inspection is sufficient, as Health Canada does not recommend testing the air for mold. A test does not predict the effects on the body and provides little information about the source of the damage. Quebec adds that air samples are often very difficult to interpret.
If doubts remain after the inspection—particularly if the building has previously experienced flooding or leaks—a qualified specialist may recommend a “non-viable” air test to help identify hidden problems in the cavities.
For the air distribution system, a bacteriological analysis of the ventilation system involves collecting samples and sending them to a laboratory, which counts the yeast, mold, and bacteria.
First, address the source of the moisture, then plan a cleanup appropriate to the extent of the affected areas, following the three scenarios identified by Health Canada:
For a small area, wear goggles, a disposable N95 mask, and disposable gloves, then clean with diluted dish soap—without bleach, since it isn’t necessary. People with sensitivities should leave the room during cleaning, as the process may release spores into the air; also, be sure to ventilate the room thoroughly before allowing the family to return.
According to the province of Quebec, porous materials that have been severely damaged by water—such as drywall, carpets, mattresses, or upholstered furniture—must be discarded. Multiple areas of mold scattered throughout the house often indicate a more widespread problem in the building.
Do not paint or caulk a moldy surface. Removing moldy wallpaper can also release a lot of spores. To compare your options, check out our article on whether to decontaminate on your own or hire a professional.
Call in a professional when the affected area is large, when a strong musty odor persists without any visible signs of mold, when mold returns after cleaning, after a flood, or when the ventilation system is affected. In such cases, Quebec refers homeowners to a specialized company and cites the BNQ 3009-600 standard as the reference for the investigation and decontamination of homes.
At Ventilo Exp’air, we perform robotic and visual inspections of ductwork, complete with a photo report and recommendations. If contamination is detected, we decontaminate the ducts using an antimicrobial product approved by Health Canada as part of our mold prevention and treatment service. To schedule an inspection, please call us at 450-577-5578.
Yes, it’s possible, because an earthy or musty odor often indicates the presence of mold. Health Canada recommends consulting a specialist when a strong odor persists without any signs of a leak, since mold may be present inside walls and cavities.
In most cases, a test is of little use, because the Government of Quebec states in its air quality guidelines that it is usually not necessary to test the air or surfaces to confirm the presence of mold. A test does not reveal the source of the moisture, so a thorough inspection remains the most useful approach.
Yes, the EPA states that mold can be found inside ducts. A musty odor when you turn on the heat is a sign of this. First, check the filters and humidifiers, then have the system inspected by a qualified professional if the problem persists.
No, the EPA advises against painting or sealing a moldy surface. Paint does not eliminate the cause, so you must clean the surface and then fix the leak or water intrusion.
These organizations have not set a specific threshold, but they recommend keeping humidity low enough to prevent condensation, in accordance with the targets outlined above. Regular condensation on windows indicates that the humidity level may be too high.